LAMINATORS

Technical Data

Output: approx. 60-110 die-cuts/minute depending upon label height.
Die-cut format: Max 4.0" wide X 2.8" high (with optional modifications label height may be increased up to 19.5")
Label stock width: max. 125mm (4.92")
Laminate width: max. 120mm (4.72")
Material feed: stepper motor
Feed synchronization printer to laminator: dancer arm
Positioning: black mark reader with light guide
Positioning tolerance: plus/minus 0.1mm (0.004")
Batch size selection: decrementing counter with LED indicator
Expanding mandrels: for finished labels—max. roll outside diameter: 150mm (5.9"); inside diameter rolls: 76mm (2.99")
Laminate roll diameter: max. 250mm (approx. 250M of laminate material (9.84"/820ft); inside diameter rolls: 76mm (2.99")
Depth of cutting lines: for paper; approx. 500mm; for synthetics; approx. 300mm
Label and laminate thickness, combined: recommended max, approx. 8 - 10 mil
Cutting unit: precision die-cut head with prestressed ball bearing guides
Cutting tool: strip-steel cutter in a quick-change magazine
Pressure adjustment: in steps of 0.005mm (0.0002")
Electrical data: 220/110VAC (factory adjusted), frequency 50/60 Hz, power 350W
Dimensions: (length, width, height) 450 X 460 X 440mm (17.71" X 18.11" X 17.32")
Weight: approx. 198.41 lbs. (90kg.)
Options: integrated hot stamping unit, work station, dispenser, slitting knife